Epson Printer

How to Fix Epson WF-3640 Error Code 0x97?

Learn How to fix Epson WF-3640 Error Code 0x97?

Epson Printer error
Epson Printer

There are a variety of error codes that can be displayed when printing, and Epson WF-3640 error can be identified as among the most frequent codes that are typically encountered by customers.

Do not be overwhelmed or confused when you encounter the error message on your printer WF-3640. There’s a rational explanation for it and solutions.

Error Code 0x97 and Its Meaning

While this error can be caused by a variety of causes, it’s really an ordinary (printing) issue.

This error message will provide you a signal to turn off and on the printer. In addition, when the error code is displayed the printer will cease functioning.

You will not be able to use it until you resolve the problems. This issue typically occurs to long-time users as well as those who are new however with a large print job.

It is a matter of letting your printing device work (in certain instances, it’s excessively, in some cases,) and then problems arise.

 

There are a variety of common causes to cause the Epson WF-3640 errors code 0x97 appearing. In the majority of cases it is (internal) hardware-related, but it’s not limited to that cause.

It’s quite typical that this issue occurs to various Epson versions such as WF 7620, WF 7610 and WF 4630 too.

It’s possible that there is an internal hardware issues, such as motherboard malfunction or any other issue in the system

 

It is possible that the printer has a filthy printheads, jammed newspaper, or even dust that has accumulated in the print area can block the printer. Epson printer communication error also occurs may times.

Another reason is a hardware issue. This is that explains why the error message appears.

Clogged nozzles on printers could cause a variety of issues that the code 0x97 is among them.

How to Solve the Epson WF-3640 Error Code 0x97?

In the first place, don’t get frightened when you see the Epson WF-3640 code of error is 0x97. Keep calm and follow several things

1. Update the Printer Driver

A driver that is outdated or incompatible could be the cause of your problem. You should update it with the latest version to ensure an efficient operation.

If you are using a another operating system, there is don’t worry. It will guide you through the steps

Updating Driver for Windows

  • Navigate to your main Desktop. Find the Taskbar
  • Locate an icon that says Software Update by right-clicking it
  • There will be a printer settings window. Click on the Utility tab, then select Driver Update.

If you’ve updated your driver but the error message has gone away, the driver is in need of fixing.

Another approach is to execute these steps:

  • Choose Start
  • Use Epson Software or Epson Software. Epson Software or Epson
  • Choose Epson Software Updater

Updating Driver for OS X

Similar to what happens with Windows the same way, you must take several steps for a success.

  • Open Applications
  • It is recommended to select the Epson Software folder.
  • Choose Epson Software Updater

2. Reboot the Printer

This is the most basic troubleshooting method to find the primary cause for zero.

  • Switch off the printer and disconnect it. Be sure to remove all cable (any cable) that are connected to your printer.
  • The printer should be left for five minutes. If you print 10 pages, it’s fine.
  • Hold the Power (button) and hold it for one minute.
  • While you’re doing it (holding the power off) connect your printer with the power cable.
  • Then , hold the Power for a further 1 minute.
  • After about a minute, you can take the button off. This should allow you to restart your printer and clear it of any issues.

3. Clogged Cartridges Check

The error message may be displayed in the event that the cartridges are blocked. This can affect the printer’s performance. The best solution is to wash it.

  • Click on the Choose Home icon
  • Start with Setup
  • Choose Maintenance
  • Choose Printhead Nozzle Make sure to check
  • The printer prints four grids, each in color. It will help you figure out the nozzle that is blocked.
  • If there isn’t a gaps in lines (printed) lines and lines, then you can proceed with Done. If you do discover gaps or lines that appear slightly faint, you should Clean the Printhead
  • Let the cleaning process finish on its own. Make sure to turn off the printer while the cleaning process is in progress.

Certain methods might require installing fix tools or troubleshooter, or similar tools for a simpler process. It is also possible to contact Epson support and request their help.

Don’t be confused when you receive Epson WF-3640 error message You now are aware of the best way to handle it.

Leave a Reply

Your email address will not be published.